How does a continuous baler help in scrap management

Advantages of scrap shear

Scrap shears mainly use hydraulic braking, so pay attention to the basic operation matters in daily operation. Before the no-load test run of the scrap shear, manually turn the machine for a working stroke, and start the equipment only after it is confirmed to be normal. Check that the oil storage tank of scrap shear shall be sufficient. After starting the oil pump, check whether there is leakage in the valve and pipeline. The pressure should meet the requirements. Open the vent valve to release the air in the system.

Scrap shears have high equipment level and good quality of processed products. The design is scientific and the configuration is reasonable. It not only adopts digital control, but also pays more attention to intelligence, so as to adapt to large-scale and efficient industrial production.

Scrap shearing machine adopts computer equipped knife to achieve the optimal blade clearance; Adopt hydraulic locking cutter shaft to control different burr requirements; Adopt advanced compensation means to achieve no movement of cutter shaft and precise positioning; Realize automatic operation from feeding, shearing, unloading, packaging, on-line inspection and alarm; Grating and safety imaging equipment are set around the train to minimize personal accidents. In order to meet the needs of special industries, automatic control laser technology is developed to cut strips of different shapes.

Scrap shears minimize the auxiliary operation time, and the design is user-friendly.

The scrap shearing machine can reduce the auxiliary time and operation labor intensity as much as possible from feeding to finished products, and the maintenance is convenient. For example: automatic belt positioning and guiding; Fast positioning and locking; Multi station uncoiling, shearing, receiving and sorting to improve production efficiency.

Advantages of scrap handling machine

1. The scrap shearing machine has the advantages of low operation cost, high efficiency, no pre capping, less operation and continuous feeding.

2. The self closing operation is fully automatic controlled by PLC, which greatly improves the working efficiency of scrap shear.

3. Loading and transportation by towing vehicles.

4. Scrap shears are small, integrated and highly stable.

5. The scrap shear can be controlled by engine.

6. Low investment and operating costs.

7. There is a wear plate cover on all inner surfaces of the scrap shear, so there is only less wear.

8. The waste is added from above. After being compressed by the preloading cylinder, the waste will automatically slide down and be cut by the shear cylinder,

This design greatly improves the efficiency and safety of the equipment.

Characteristics of scrap handling machine

That is, power components, executive components, control components, auxiliary components (accessories) and hydraulic oil. The operation process of the system is: the power element provides oil pressure for the whole hydraulic system under the hydraulic motor and function. After the programmable controller of the control system sets various parameters in the programming system, the control element opens and closes the valve body under the action of electromagnetic drive, so as to guide the flow direction of hydraulic oil, and control the execution unit to carry out corresponding actions through flow direction transformation.

Features of scrap baler

1. Compared with the shearing machine, the hydraulic cutting machine has the advantages of small weight, convenient operation, small inertia, easy adjustment, small overload, easy operation and safety.

2. The equipment has the functions of manual, automatic and remote control. The operation and control is convenient and simple. The shear port can start and stop at any position in the working process, and the size of the shear port can be controlled arbitrarily according to the size of the sheared material, so as to obtain the working benefits.

3. The equipment is designed with a fast type. Under the condition of not increasing the motor power and oil pump displacement, the speed remains fast under the shear (about 300-800 tons), and the speed will be automatically changed when shearing large materials. Restore the original shear force, so as to nearly double the work efficiency.