Scrap shears mainly use hydraulic braking, so pay attention to the basic operation matters in daily operation. Before the no-load test run of the scrap shear, manually turn the machine for a working stroke, and start the equipment only after it is confirmed to be normal. Check that the oil storage tank of scrap shear shall be sufficient. After starting the oil pump, check whether there is leakage in the valve and pipeline.
READ MOREScrap shredder (scrap iron is not easy to shear) is a widely used method in scrap processing and production. It is widely used in the field of scrap processing and is one of the main methods of scrap processing.
READ MOREWhat is water cooled cable for induction furnace? Many equipment will generate heat after long use, even the cable. If the current is large, it will be easy to generate heat. The occurrence of heat will affect the normal work and service life. Water-cooled cable is a kind of cable that uses water to cool down. Because it solves the heating problem, the working strength and capacity of water-cooled cable are much higher than those of ordinary cable.
READ MOREAdvantages: waste alloying elements can be recycled, refractory alloying elements can be melted by arc at high temperature, and the temperature in the furnace can be precisely controlled. To sum up, eAF uses scrap steel as the main raw material, so alloy elements in scrap steel can be reused in EAF
READ MOREThe oven is composed of a oven burner, a rotating arm, a gas pipeline system, an air pipe, etc. The oven burner is installed on the top of the steamed bun for open or closed heating. It is mainly used for baking the tundish in steel mills to reduce the temperature drop and heat loss of the steel ins
READ MORECarbon lance mainly refers to electric furnace smelting, generally refers to the electric furnace door carbon lance, there are also carbon lance furnace wall. The carbon oxygen gun at the furnace door has two water-cooled nozzles, some are two water-cooled oxygen guns, some are a combined oxygen gun
READ MOREThe water-cooled cover of electric arc furnace is widely used because it has a series of advantages such as long service life and refractory material saving. However, the current domestic manufacturers use the situation Several problems need to be further solved: (1) After using the all-water-cool
READ MOREThe pressure in the furnace chamber of the vacuum furnace can be pumped into an industrial furnace whose pressure is lower than atmospheric pressure. The vacuum furnace is heated by electricity, and the surface of the heated workpiece is not oxidized or decarburized, with small deformation and good
READ MORE