Fume treatment plant's maintenance

How to maintain fume treatment plant?

How to maintain the fume treatment plant? Before that, we have explained the consequences of industrial vacuum cleaners that do not pay attention to maintenance or use incorrect methods. Let's introduce how to use and maintain the vacuum cleaner correctly.

1. There are many kinds of dust removal equipment, with different models, specifications, structural performance and functional characteristics. Before use, you need to carefully read the manual to avoid damage to the industrial vacuum cleaner and endanger the safety of users due to improper use.

2. The ambient temperature of ordinary industrial vacuum cleaners shall not exceed 40 ℃, the workplace shall not be above 1000 meters above sea level, there shall be a good ventilation environment, and the air shall not be used in a dry indoor environment with flammable and corrosive gases.

3. Dry dust removal equipment is not allowed to absorb water, and the vacuum cleaner cannot be operated with wet hands. If there is large paper ball, plastic cloth or waste larger than the diameter of the straw in the place to be cleaned, it shall be removed in advance, otherwise it is very easy to block the straw. When the industrial vacuum cleaner absorbs liquid substances, remove the filter element and pay attention to emptying the liquid in time.

4. Connect the ground wire to ensure power safety. General industrial vacuum cleaners should work continuously for no more than 8 hours at a time, mainly to prevent the motor from overheating and burning. A specially designed industrial vacuum cleaner can work continuously for 36 hours without shutdown due to the special heat dissipation system, which can be used together with the machine tool.

5. When using an industrial vacuum cleaner equipped with an automatic winding device, pull out the power cord for a sufficient length. Do not pull over the power cord. If you see a yellow or red mark on the power cord, you must stop pulling out immediately to prevent pulling the power cord too far. If you need to roll back the power cord, press the button directly and it will retract automatically.

6. Do not over expand and bend the industrial vacuum cleaner hose or fold it frequently, which will affect the service life of the industrial vacuum cleaner hose.

7. Check whether the power plug and power line of dust removal equipment are damaged, and electric leakage will burn out the motor of industrial vacuum cleaner.

8. Mobile dust removal equipment should be careful not to be impacted, so as to prevent damage and air leakage of the barrel of the industrial vacuum cleaner and reduce the suction of the industrial vacuum cleaner.

9. Keep the machine in a ventilated and dry place when not in use For industrial vacuum cleaners that do not support long-time continuous work, the continuous working time shall be controlled within the working time supported by the industrial vacuum cleaner, and do not work overload, otherwise the service life of the industrial vacuum cleaner will be affected.

10. If the main machine of the dust removal equipment is hot and has scorching smell, or the industrial vacuum cleaner vibrates and makes noise abnormally, it shall be shut down and sent for repair immediately. Do not overload the industrial vacuum cleaner.