  leonard.kzao@chnzbtech.com    +86-15596648075    +86(0) 2988087080
Home » Products » Secondary Refining Furnace » ElectroSlag Remelting Furnaces (ESR)

Featured Products

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
sharethis sharing button

ElectroSlag Remelting Furnaces (ESR)

Brand-CHNZBTECH:
(1) Automatic heat sealing technology;
(2) X-Y electrode centering and accurate weighing system;
(3) All coaxial conduction;
(4) Droplet control; constant melting rate control;
(5) High-quality tool steel, maraging steel, duplex steel tube billet, cold-rolled roll;
Availability:

ElectroSlag Remelting Furnaces (ESR)


   Electroslag remelting (ESR), also known as electro-flux remelting, is a process of remelting and refining steel and other alloys for mission-critical applications in aircraft, thermal power stations, nuclear power plants, military technology, etc.

ESR1

    The electroslag remelting (ESR) process is used to remelt and refine steels and various super-alloys, resulting in high-quality ingots. This process can be started up through vacuum induction melting. The ESR process uses the as-cast alloy as a consumable electrode. Electric current (generally AC) is passed between the electrode and the new ingot, which is formed in the bottom of a water-cooled copper mold. The new ingot is covered in an engineered slag that is superheated by the electric current. The electrode tip is slowly melted from contact with the slag. These metal droplets travel through the slag to the bottom of the water-cooled mold and slowly freeze as the ingot is directionally solidified upwards from the bottom of the mold. The slag pool floats above the refined alloy, continuously floating upwards as the alloy solidifies. The molten metal is cleaned of impurities that chemically react with the slag or otherwise float to the top of the molten pool as the molten droplets pass through the slag.

ESR2

    Electroslag remelting uses highly reactive slags (calcium fluoride, lime, alumina, or other oxides are usually the main components) to reduce the amount of type-A sulfide present in biometal alloys. ESR reduces other types of inclusions as well, and is seen as an alternative to the vacuum arc remelting (VAR) method. An example of the use of the electro-slag refined (ESR) steel technique is the L30 tank gun.CrNi60WTi is a stainless steel which is best formed by either ESR or VAR. General process in steel making plant with ESR as follows:

ESR3

Previous: 
Next: 

QUICK LINKS

PRODUCTS

CONTACT

Address: 25-26th Floor Silk Road Center, International logistic and business zone, Baqiao District, Xi'an, China.
Phone: +86-15596648075        
               +86(0) 2988087080
Fax: 029-89613639
Contact us
Copyright  2012 - 2021 CHNZBTECH Co.,Ltd. 丨Sitemap