Home » News


china electric arc furnace- CHNZBTECH.jpg
Improve the age of DC electric arc furnace

According to the development trend of electric furnace steelmaking and the trend of general contracting of refractory materials, we should pay attention to refractories for electric furnaces as general contracting of refractory materials.The life of electric smelting furnace is not only closely rela

2020 11-30
Electric arc furnace-chnzbtech.jpg
Main features of electric arc furnace

Although EAF steelmaking has many advantages, however, due to the problems of scrap and electricity cost in China, EAF steelmaking can not compete with converter steelmaking in ordinary steel and long-term products. EAF steelmaking only occupies a leading position in the production of special steel

2020 10-28
electric arc steel furnace suppliers.png
Electric arc furnace's 4 classification methods

There are many ways to classify electric arc furnaces.According to the melting form of the electrode, it is divided into(1) Non-consumable electrode type electric arc furnace, which uses tungsten or graphite as the electrode, and the electrode itself is not consumed or consumed very little during th

2020 10-23
Tapping spout electric arc furnace suppliers.png
Electric arc furnace's development history

French Heroult (P.L.T.Héroult) used the high temperature of the electric arc of the electrode to develop an alternative energy source for coal and invented the electric arc furnace for industrial direct smelting from 1888 to 1892. At first, the electric arc furnace was only used for the production of calcium carbide and ferroalloys. It was not until 1906 that it was developed for steelmaking, which enabled the economical and large-scale recycling of steel scrap.

2020 10-21
Introduction of Electric arc furnace.png
Introduction of Electric Arc Furnace

Electric arc furnace uses the high temperature generated by the electrode arc to smelt ores and metals. When the gas discharge forms an arc, the energy is very concentrated, and the arc zone temperature is above 3000 ℃. For smelting metals, electric arc furnaces are more flexible than other steelmak

2020 10-19



Address :
Block A, Haibo Square, 9th Fengcheng Road, Xi'an, China.

Phone :

Fax :

Contact us
Copyright  2012 - 2020 CHNZBTECH Co.,Ltd. 丨Sitemap