  leonard.kzao@chnzbtech.com    +86-15596648075
Home » News

CHNZBTECH

NEWS CENTER
vacuum oxygen decarburization factory - CHNZBTECH.png
Secondary refining's effects

1. Undertake the original partial refining function of primary refining furnace, complete partial steelmaking reaction under the best thermodynamic and kinetic conditions, and improve the production capacity of monomer equipment; 2. Uniform molten steel and accurate control of steel composition; 3. Accurately control the temperature of molten steel to meet the requirements of continuous casting production;

READ MORE
2022 02-25
stainless steel making furnace suppliers - CHNZBTECH.jpg
Vacuum degassing furnace---the common problems

The vacuum degassing furnace first inhales the molten steel into the vacuum chamber and then blows argon gas into the molten steel on the side walls of the two risers. The argon gas expands rapidly under the action of low temperature and high pressure in the upper part of the vacuum chamber, making

READ MORE
2021 06-30
Steel making.jpg
Refining to remove oxides

Refining to remove oxidesAt the end of the secondary refining, in order to obtain high purity molten steel, so-called "bubble floating purification" is required. Here, "bubble floating and purification" means the boiling of molten steel caused by small bubbles near the bottom of the ladle top slag r

READ MORE
2021 03-29
China vacuum refining furnace- CHNZBTECH  .jpg
The LF ladle refining furnace produced by our company is particularly good

Through our refining technology, the efficiency and automation level of LF has been fully utilized.The LF ladle refining furnace is currently the most widely used external refining equipment. It is used to refine the molten steel in the primary furnace, and can adjust the temperature of the molten s

READ MORE
2020 12-23

QUICK LINKS

PRODUCTS

CONTACT

Address : Block A, Haibo Square, 9th Fengcheng Road, Xi'an, China.
Phone : +86-15596648075
Fax : 029-89613639
Contact us
Copyright  2012 - 2021 CHNZBTECH Co.,Ltd. 丨Sitemap