The failure of vacuum furnace equipment can be roughly divided into system leakage, steam supply failure, valve failure, condenser failure, vacuum pump failure, instrument failure, mode setting error, etc.
READ MOREThe relevant control parameters of the vacuum degassing furnace are set by the MMI screen. The relevant data is sent to the PLC of the VD furnace, and the PLC of the PLC boiler and the wire feeder control the relevant electrical operations through the SINECH1 bus. At the same time, the detection sig
READ MOREPrecautions for the operation of LF furnace refining technology 1. Inspection and preparation before refining of power distribution workers 1.1 Carefully check whether the selector switches are correct according to the equipment operating regulations. 1.2 Whether the high-voltage electrical system is normal. If there is any abnormality, report to the dispatching room and notify the electrical personnel to deal with it in time.
READ MOREThrough our refining technology, the efficiency and automation level of LF has been fully utilized.The LF ladle refining furnace is currently the most widely used external refining equipment. It is used to refine the molten steel in the primary furnace, and can adjust the temperature of the molten s
READ MORE