leonard.kzao@chnzbtech.com +86-15596648075 +86(0) 2988087080
- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
English
A tapping box protruding from the furnace shell is installed on the original tapping side to replace the original tapping groove. Refractory materials are built inside the tapping box, and a small molten pool is formed. It is connected with the large molten pool at the bottom of the original furnace and has a smooth transition. The tapping hole is opened vertically at the bottom of the small molten pool of the tapping box.
READ MORE
Saving production costs is a major advantage of continuous charging EAF. The production cost savings brought by the continuous charging EAF smelting process mainly comes from continuous charging and stable smelting state. These factors determine that less total energy (electrical and chemical) needs to be consumed in the smelting process, and can use energy better and more efficient.
READ MORE
The consumption of the electrode runs through the whole smelting process, and its consumption is affected by many factors.
READ MORE
How to do the maintenance of electric arc furnace? Electric arc furnace is a large-scale steelmaking equipment, the later maintenance and maintenance work directly affects the efficiency of steelmaking, so how to do the maintenance and maintenance of electric arc furnace? Standardized operation st
READ MORE
Electric Arc Furnace (EAF) system The system consists of an Advantech 5x86/133 industrial computer, input and output circuit boards (D/A board, A/D board and trigger pulse board), WB series current and voltage sensors, Fuji G11 One spare) and ac asynchronous motor. The system block diagram is sho
READ MORE
Analysis of the advantages of eAF bottom blowing technology of eAF manufacturers, the eAF bottom blowing technology (DPP) was first applied in Germany Thysen Special Steel Company 110T eAF in 1980. The main advantages are as follows: (1) Promote the melting of scrap steel, reduce the soft melting p
READ MORE
Arc is a kind of arc discharge of gas. Gas arc discharge shows that the voltage between the electrodes is very low, but the current through the gas is very large, there is dazzling white light, and the arc zone temperature is very high (about 5000k). The huge current density comes from the thermioni
READ MORE
Electric arc furnaces are large in size and high equipment investment, so only enterprises with a certain scale use electric arc furnaces. Compared with the electric arc furnace, the intermediate frequency induction furnace has a lower cost and is suitable for small and medium-sized enterprises.
READ MORE