  leonard.kzao@chnzbtech.com    +86-15596648075    +86(0) 2988087080
Home » News


steel making by electric arc furnace (1).png
Electric arc furnace's introduction - part 2

The electric arc furnace is mainly composed of electrode holder, electrode, furnace cover, molten bath, furnace door, tilting cradle, hydraulic steel and other components. The furnace bottom and furnace wall are constructed of acidic or alkaline refractory materials. First, the electric energy is transmitted to the furnace through the electrode, and then the electrode and furnace charge are used to generate electric arc to raise the temperature in the furnace. Finally, the high temperature makes the ore metal melt.

2022 10-28
eaf smelting company -Chnzbtech.jpg
Factors affecting graphite electrode consumption in eaf smelting

The generalized consumption of graphite electrode in smelting can be divided into active consumption, natural consumption or technical consumption.

2022 10-03
EBT company -Chnzbtech.jpg
Best EBT crusting problem solution shared from Chnzbtech

A tapping box protruding from the furnace shell is installed on the original tapping side to replace the original tapping groove. Refractory materials are built inside the tapping box, and a small molten pool is formed. It is connected with the large molten pool at the bottom of the original furnace and has a smooth transition. The tapping hole is opened vertically at the bottom of the small molten pool of the tapping box.

2022 07-22
China arc melting furnace   - CHNZBTECH.png
Common steel smelting methods

Steelmaking refers to the steel obtained by smelting scrap steel or pig iron into a steelmaking furnace according to a certain process, and the excess carbon and other impurities are converted into gas or slag to be removed; the encyclopedia below will introduce what steelmaking is? Commonly used steelmaking smelting methods and principles and steelmaking process flow.

2022 01-28
Excentric bottom tapping electric arc furnace - CHNZBTECH.png
About the electric furnaces' technology of slag-free steel tapping, how much do you know?

In the early days, the direction of rotation of the closing mechanism of the tap hole of DEMAC was vertical, and later it was mostly changed to the horizontal direction. For example, the BSE tapping technology in Germany, its advantage is that the plate that closes the tap hole moves horizontally, and the total height is low.

2022 01-10




Address: 25-26th Floor Silk Road Center, International logistic and business zone, Baqiao District, Xi'an, China.
Phone: +86-15596648075        
               +86(0) 2988087080
Fax: 029-89613639
Contact us
Copyright  2012 - 2021 CHNZBTECH Co.,Ltd. 丨Sitemap