Article List
- (DRI) Impact on electric arc furnace steelmakingThe influence of direct reduced iron (DRI) on electric arc furnace steelmaking1. Productivity and yield Production practice shows that adding DRI has a great impact on the productivity and yield of the electric arc furnace. In recent years, the number of large electric arc furnace plants newly builtZBTECH News December 30, 2020
- Technical advantages of electric arc furnaceTechnical advantages of electric arc furnace1. High efficiencyEAF adopts a new scrap preheating technology, which can minimize production costs, increase production, and meet environmental protection standards. Through 100% steel scrap preheating and effective recycling of heat energy, the energy coZBTECH News December 28, 2020
- Our company's ferroalloy refining furnace is quite goodFerroalloy electric furnaces, including deep-melting reduction electric furnaces and ferroalloy refining electric arc furnaces, all use electric arc heating and are equipped with three graphite electrodes. The ferroalloy electric furnace body is generally circular, and the furnace body is divided inZBTECH News December 25, 2020
- The LF ladle refining furnace produced by our company is particularly goodThrough our refining technology, the efficiency and automation level of LF has been fully utilized.The LF ladle refining furnace is currently the most widely used external refining equipment. It is used to refine the molten steel in the primary furnace, and can adjust the temperature of the molten sZBTECH News December 23, 2020
- The electric arc furnace produced by our company is very goodWe optimized the electric arc furnace technology to achieve the best balance among raw materials, scrap preheating, energy saving and environmental protection, process control, automation control, smelting cycle, and production capacity.The electric arc furnace inputs electric energy into the electrZBTECH News December 21, 2020
- Ferroalloy furnace manufacturer: What are the characteristics of ferroalloy submerged arc furnace1. Energy saving: The production of ferroalloys accounts for a large proportion of electricity consumption, so reducing power consumption and increasing the cost of thermal efficiency is an effective way to reduce the production cost of ferroalloys.At present, the actual power consumption of my counZBTECH News December 18, 2020
- Industrial electric arc furnace: what are the problems in developmentThe input energy of industrial electricity is in the form of chemical energy in fuel, electric energy, heat energy of high temperature flue gas, etc., aluminum alloy industrial electric arc furnace, and after industrial electric arc furnace conversion, it outputs steam, high temperature water orZBTECH News December 16, 2020
- Analysis of Power Consumption in the Process of Smelting Scrap SteelAnalysis of power consumption in smelting scrap steelFeatures: Electric furnace for smelting ore and metal at high temperature generated by electrode arc.When the gas discharge forms an arc, the energy is very concentrated, and the arc zone temperature is above 8000°C.Regarding metal smelting,ZBTECH News December 14, 2020
- Steelmaking electric furnace: introduction to the advantages of the water-cooled furnace coverThe existing furnace covers of steel-making electric furnaces mostly adopt the structure of masonry refractory bricks. The disadvantages of the furnace covers of this structure are many brick cracks, poor overall performance, high energy consumption, short service life, and long maintenance.The purpZBTECH News December 11, 2020
- What are the characteristics of ferroalloy submerged arc furnace1. Energy saving: The production of ferroalloys accounts for a large proportion of electricity consumption, so reducing power consumption and increasing the cost of thermal efficiency is an effective way to reduce the production cost of ferroalloys.At present, the actual power consumption of myZBTECH News December 09, 2020